Need more wire for your Underground Dog Fence or just want to replace your old broken wire ?

These wire and flag kits or Boundary kits will work with any manufacturers wired underground pet containment system. Our kits provide a better quality product and longer life-span for your dog fence.

Frequently Asked Questions about :    Wire ?   Installation ?   Training?

Wire Guide

Please note: the numbers below are approximate based on a typical perimeter layout.  Additional wire may be required if your design is to include flower beds, pools etc..  As a general rule of thumb it is always a good idea to have a little extra on hand just in case you may need to fence off additional areas or change a portion of your boundary at a later time.  Also, should your boundary wire ever break - we highly recommend not just splicing the two broken ends back together, but splicing in an new 6-8 foot section of wire over the entire area to replace the break.  This is done to avoid any possible problems you may encounter with moisture contaminating or corroding the exposed ends and inside the sheath.

For proper training of your pet, we recommend one set of flags per 500 ft of boundary wire ( ie: 1 flag every ten feet ).  Boundary kits are comprised of 500ft (150m) wire & 50 training flags.

...In-Stock items ship same day.....2nd or 3rd day Delivery available......NO DUTY Guaranteed...

All prices on this page are in US Dollars